30HP, D Series CDD-30D7CDD

30HP, D Series CDD-30D7CDD

Manufacturer: Sullivan Palatek
request for quote


Call 800-716-5550 for a quotation on your specific configuration today.

Sullivan-Palatek manufactures one of the most reliable, high performance, low maintenance air ends in the industry. Our advanced rotor design features oversize radial thrust bearings and precision working rotary screws that provide virtually no wear.


Complete package with starter, air cooled oil cooler/aftercooler and protective devices for high temperature and low oil shut down. Extended life mounted desiccant dryer to eliminate moisture and contaminants complete with in line filter.

Compressor Features

  • Motor Starter: 208/230/460/575 volt, full voltage magnetic starter with 110 volt controls, Nema-1 enclosure, ETL listed, solid state control circuit breaker protection and three phase overload with external reset and phase protection.
  • Protective Devices: Class 20 solid state overload relay, high temperature and over pressure shutdown switches, and anti-restart pressure switch preventing starting while air compressor is pressurized.
  • Inlet Modulation Control
  • Lube Fill & Level Elbow : One Piece lube fill elbow and level sight glass. Vented cap for pressure release when removing.
  • HD Air Intake Filter: Oversized dry type, single stage with replaceable element.
  • Inlet/Check Valve: One piece housing for dependable performance and complete modulation.
  • Coupling & Drive: Compressor is flange mounted to motor C-face for positive alignment and direct driven.
  • Air Cooled Aftercooler: Double pass air-cooled aftercooler with thermostatic control for maintaining the appropriate oil operating temperature and reducing the discharge air temperature to within 15 degrees of ambient.
  • Deluxe Gauge Panel: Deluxe gauge panel includes 2.5" liquid filled sump and line pressure gauges, 2.5" oil temperature gauge, with oil filter and separator differential pressure gauges.
  • SFD Desiccant Dryer System:A practical, reliable, cost-effective dryer system insuring quality compressed air: free of oil, contaminants and water.
  • High Efficiency Coalescing Filter:The incorporation of filtration into your compressed air system will produce benefits in both productivity and product quality.

Dryer Features

  • Uninterrupted operation in clean, dirty, or dusty conditions
  • Standard unit operates up to 200 psi
  • Environmentally efficient, requiring no refrigerant
  • No condensate drain line required

Filter Features

  • 99.9999% Efficiency
  • Particle Removal Down to 0.01 Micron
  • Max. Oil Carryover 0.008 PPM w/w
  • Nominal Pressure Drop 1.2 PSID
  • ISO 8573 (Class 1)

Optional Compressor Equipment

  • Air Filter - Pop Up Indicator
  • Auto Restart
  • Enclosure
  • HATD Shutdown Switch
  • Maintenance Kit
  • Microprocessor Control without Redundancy
  • Microprocessor Control with Redundancy
  • Nema-4 Microprocessor Control
  • Tank Mount: 120, 200, and 240 Gallon with Relief Valve, Pressure Gauge and Electric Auto Drain
  • Platform Mount with Separator Trap

Model CDD-30D7CDD

Type Name

D-Series Air Compressor CDD

Capacity, ACFM:


Discharge Conn:


Lube Reservoir Capacity:

3.5 GAL

Maximum Full Load(psiq):


Minimum Full Load(psig):


Motor Horsepower:


Motor Speed(RPM):